GATE AUTOMATIONS

FURY 400 GEAR MOTOR 230V WITH CONTROL UNIT FOR RESIDENTIAL USE AND MECHANICAL LIMIT SWITCHES  The sliding gate gear motor series FURY combines the great reliability typical of BAME products with a new pleasant and functional design. The base of the gear motor is made of die-cast aluminum, powder-coated to withstand the test of time. The internal mechanics of steel and cast iron, along with powerful and quiet electric motors, ensure long-lasting mechanism durability and secure gate locking. The electronic control unit, simple to program and made with high-quality components, is housed inside a special plastic box that protects it from moisture and insects. The limit switch can be either magnetic (with sensors integrated into the electronic board in the 230 Volt version) or electromechanical with micro switches and a spring protected inside the ABS cover. The emergency release is activated simply by pulling the special lever located in front of the motor body and protected by a key lock.

FURY 24 V GEAR MOTOR 24 VDC WITH CONTROL UNIT FOR CONDOMINIUM USE AND MAGNETIC LIMIT SWITCHES  The sliding gate gear motor series FURY combines the great reliability typical of BAME products with a new pleasant and functional design. The base of the gear motor is made of die-cast aluminum, powder-coated to withstand the test of time. The internal mechanics of steel and cast iron, along with powerful and quiet electric motors, ensure long-lasting mechanism durability and secure gate locking. The electronic control unit, simple to program and made with high-quality components, is housed inside a special plastic box that protects it from moisture and insects. The limit switch can be either magnetic (with sensors integrated into the electronic board in the 230 Volt version) or electromechanical with micro switches and a spring protected inside the ABS cover. The emergency release is activated simply by pulling the special lever located in front of the motor body and protected by a key lock.

FURY 600-MECC GEAR MOTOR 230V WITH CONTROL UNIT FOR RESIDENTIAL USE AND MECHANICAL LIMIT SWITCHES The sliding gate gear motor series FURY combines the great reliability typical of BAME products with a new pleasant and functional design. The base of the gear motor is made of die-cast aluminum, powder-coated to withstand the test of time. The internal mechanics of steel and cast iron, along with powerful and quiet electric motors, ensure long-lasting mechanism durability and secure gate locking. The electronic control unit, simple to program and made with high-quality components, is housed inside a special plastic box that protects it from moisture and insects. The limit switch can be either magnetic (with sensors integrated into the electronic board in the 230 Volt version) or electromechanical with micro switches and a spring protected inside the ABS cover. The emergency release is activated simply by pulling the special lever located in front of the motor body and protected by a key lock.

FURY 600-MAGN GEAR MOTOR 230V WITH CONTROL UNIT FOR RESIDENTIAL USE AND MAGNETIC LIMIT SWITCHES  The sliding gate gear motor series FURY combines the great reliability typical of BAME products with a new pleasant and functional design. The base of the gear motor is made of die-cast aluminum, powder-coated to withstand the test of time. The internal mechanics of steel and cast iron, along with powerful and quiet electric motors, ensure long-lasting mechanism durability and secure gate locking. The electronic control unit, simple to program and made with high-quality components, is housed inside a special plastic box that protects it from moisture and insects. The limit switch can be either magnetic (with sensors integrated into the electronic board in the 230 Volt version) or electromechanical with micro switches and a spring protected inside the ABS cover. The emergency release is activated simply by pulling the special lever located in front of the motor body and protected by a key lock.

ROY4 GEAR MOTOR 230V WITH CONTROL UNIT FOR RESIDENTIAL USE AND MAGNETIC LIMIT SWITCHES  Electromechanical gear motor composed of a solid die-cast aluminum block, containing an electric motor and transmission system, powder-coated at 180° to withstand weather conditions, and an ABS-resistant cover without sharp edges. The worm screw is made of steel, while the crown gear is made of spheroidal graphite cast iron. The emergency release is activated with a hex key contained in the lockable door.

ROY 6 GEAR MOTOR 230V WITH CONTROL UNIT FOR RESIDENTIAL USE AND MAGNETIC LIMIT SWITCHES  The sliding gate gear motor series FURY combines the great reliability typical of BAME products with a new pleasant and functional design. The base of the gear motor is made of die-cast aluminum, powder-coated to withstand the test of time. The internal mechanics of steel and cast iron, along with powerful and quiet electric motors, ensure long-lasting mechanism durability and secure gate locking. The electronic control unit, simple to program and made with high-quality components, is housed inside a special plastic box that protects it from moisture and insects. The limit switch can be either magnetic (with sensors integrated into the electronic board in the 230 Volt version) or electromechanical with micro switches and a spring protected inside the ABS cover. The emergency release is activated simply by pulling the special lever located in front of the motor body and protected by a key lock.

ROY 9 GEAR MOTOR 230V WITH CONTROL UNIT FOR CONDOMINIUM USE AND MAGNETIC LIMIT SWITCHES  Electromechanical gear motor composed of a solid die-cast aluminum block, containing an electric motor and transmission system, powder-coated at 180° to withstand weather conditions, and an ABS-resistant cover without sharp edges. The worm screw is made of steel, while the crown gear is made of spheroidal graphite cast iron. The emergency release is activated with a hex key contained in the lockable door.

ROY 12 EASY 230V GEAR MOTOR WITH CONTROL UNIT FOR CONDOMINIUM USE AND MAGNETIC LIMIT SWITCHES  Electromechanical gear motor composed of a solid die-cast aluminum block, containing an electric motor and transmission system, powder-coated with epoxy paint at 180° for weather resistance, and a durable ABS cover without sharp edges. The worm gear is made of steel, while the crown gear is made of spheroidal cast iron. The emergency release is activated with a hex key contained in the lockable flap.

ROY 12 -230 230V GEAR MOTOR WITH CONTROL UNIT FOR INDUSTRIAL USE AND MECHANICAL LIMIT SWITCHES  Electromechanical gear motor composed of a solid die-cast aluminum block, containing an electric motor and transmission system, powder-coated with epoxy paint at 180° for weather resistance, and a durable ABS cover without sharp edges. The worm gear is made of steel, while the crown gear is made of spheroidal cast iron. The emergency release is activated with a hex key contained in the lockable flap.

ROY 16 – 380 400V GEAR MOTOR WITH CONTROL UNIT FOR INDUSTRIAL USE AND MECHANICAL LIMIT SWITCHES  Electromechanical gear motor composed of a solid die-cast aluminum block, containing an electric motor and transmission system, powder-coated with epoxy paint at 180° for weather resistance, and a durable ABS cover without sharp edges. The worm gear is made of steel, while the crown gear is made of spheroidal cast iron. The emergency release is activated with a hex key contained in the lockable flap.

ROY 20-230 230V GEAR MOTOR WITH CONTROL UNIT FOR INDUSTRIAL USE AND MECHANICAL LIMIT SWITCHES  Electromechanical gear motor composed of a solid die-cast aluminum block, containing an electric motor and transmission system, powder-coated with epoxy paint at 180° for weather resistance, and a durable ABS cover without sharp edges. The worm gear is made of steel, while the crown gear is made of spheroidal cast iron. The emergency release is activated with a hex key contained in the lockable flap.

ROY 20-400V 400V GEAR MOTOR WITH CONTROL UNIT FOR INDUSTRIAL USE AND MECHANICAL LIMIT SWITCHES  Electromechanical gear motor composed of a solid die-cast aluminum block, containing an electric motor and transmission system, powder-coated with epoxy paint at 180° for weather resistance, and a durable ABS cover without sharp edges. The worm gear is made of steel, while the crown gear is made of spheroidal cast iron. The emergency release is activated with a hex key contained in the lockable flap.

ROY 2500 230V GEAR MOTOR WITH CONTROL UNIT FOR INDUSTRIAL USE AND MECHANICAL LIMIT SWITCHES  Electromechanical operators for intensive/industrial use for large sliding gates. Composed of a die-cast aluminum block, painted with epoxy powder at 180°, containing an electric motor (single-phase and three-phase) and a gearbox. They operate in an oil bath that ensures high performance and total maintenance-free operation. Transmission shaft and worm gear made of steel. Crown gear made of spheroidal cast iron. The mechanical clutch ensures high anti-crushing safety. Emergency release operated by a key. ABS cover.

ROY 4000 400V GEAR MOTOR WITH CONTROL UNIT FOR INTENSIVE USE AND MECHANICAL LIMIT SWITCHES  Electromechanical gear motor composed of a solid die-cast aluminum block, containing an electric motor and transmission system, powder-coated with epoxy paint at 180° for weather resistance, and a durable ABS cover without sharp edges. The worm gear is made of steel, while the crown gear is made of spheroidal cast iron. The emergency release is activated with a hex key contained in the lockable flap.

TIGER 400-230 IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR 230V FOR RESIDENTIAL USES  Power supply for single or double swing gates up to 3.5 meters. The motor body is made of die-cast aluminum, painted with epoxy powder to ensure high resistance against oxidation; the worm gear motor is lubricated with permanent grease and requires no maintenance. It allows manual movement of the gate even in the event of a power failure by using the emergency release located on top of each piston. The 24-volt version can be equipped with an emergency battery for automatic gate movement even in the absence of mains power.

TIGER 400 -24V ELECTROMECHANICAL GEAR MOTOR IRREVERSIBLE 24V FOR CONDOMINIUM USES  Power supply for single or double swing gates up to 3.5 meters. The motor body is made of die-cast aluminum, painted with epoxy powder to ensure high resistance against oxidation; the worm gear motor is lubricated with permanent grease and requires no maintenance. It allows manual movement of the gate even in the event of a power failure by using the emergency release located on top of each piston. The 24-volt version can be equipped with an emergency battery for automatic gate movement even in the absence of mains power.

TIGER 550-230V IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR 230V FOR RESIDENTIAL USES  Power supply for single or double swing gates up to 3.5 meters. The motor body is made of die-cast aluminum, painted with epoxy powder to ensure high resistance against oxidation; the worm gear motor is lubricated with permanent grease and requires no maintenance. It allows manual movement of the gate even in the event of a power failure by using the emergency release located on top of each piston. The 24-volt version can be equipped with an emergency battery for automatic gate movement even in the absence of mains power.

TIGER 550-24V ELECTROMECHANICAL GEAR MOTOR IRREVERSIBLE 24V FOR CONDOMINIUM USES Power supply for single or double swing gates up to 3.5 meters. The motor body is made of die-cast aluminum, painted with epoxy powder to ensure high resistance against oxidation; the worm gear motor is lubricated with permanent grease and requires no maintenance. It allows manual movement of the gate even in the event of a power failure by using the emergency release located on top of each piston. The 24-volt version can be equipped with an emergency battery for automatic gate movement even in the absence of mains power.

KOMPASS 230V ELECTROMECHANICAL GEAR MOTOR IRREVERSIBLE 230V FOR RESIDENTIAL USES  Electromechanical gear motor for residential use, ideal for gates with large pillars. The universal articulated arms adapt to the installation for both leaves. Reliable and quiet, the motor is housed in a die-cast aluminum body. It is irreversible and allows the leaf to be locked without the use of an electric lock. The system is contained in a durable plastic cover with a new design. It can be equipped with an external emergency release with a wall-mounted selector.

KOMPASS 24V ELECTROMECHANICAL GEAR MOTOR IRREVERSIBLE 24V FOR CONDOMINIUM USES  Electromechanical gear motor for residential use, ideal for gates with large pillars. The universal articulated arms adapt to the installation for both leaves. Reliable and quiet, the motor is housed in a die-cast aluminum body. It is irreversible and allows the leaf to be locked without the use of an electric lock. The system is contained in a durable plastic cover with a new design. It can be equipped with an external emergency release with a wall-mounted selector.

LEOPARD-BAC HYDRAULIC GEAR MOTOR IRREVERSIBLE 230V FOR INDUSTRIAL AND CONDOMINIUM USES Power supply for single or double swing gates up to 3.5 meters. The motor body is made of die-cast aluminum, painted with epoxy powder to ensure high resistance against oxidation; the worm gear motor is lubricated with permanent grease and requires no maintenance. It allows manual movement of the gate even in the event of a power failure by using the emergency release located on top of each piston. The 24-volt version can be equipped with an emergency battery for automatic gate movement even in the absence of mains power.

LEOPARD-R REVERSIBLE ELECTROMECHANICAL GEAR MOTOR 230V FOR INDUSTRIAL AND CONDOMINIUM USES Power supply for single or double swing gates up to 3.5 meters. The motor body is made of die-cast aluminum, painted with epoxy powder to ensure high resistance against oxidation; the worm gear motor is lubricated with permanent grease and requires no maintenance. It allows manual movement of the gate even in the event of a power failure by using the emergency release located on top of each piston. The 24-volt version can be equipped with an emergency battery for automatic gate movement even in the absence of mains power.

KUDU-S 230V IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR 230V FOR RESIDENTIAL USES  The KUDU piston is composed of two die-cast aluminum bodies, powder-coated, containing the electric motor, the first worm gear reduction, the release system, and the bevel gear drive made of sintered steel. On top of the motor is a cover with an easily operable lock to access the motor release knob. The front cover houses the capacitor and the electrical connections for the motor and the micro-switches in case the motor is equipped with limit switches. The piston has the same dimensions and mounting brackets as the PUMA-PUMA PLUS, allowing for easy and quick replacement, and is made in a single version without using right and left models.

KUDU –S 24V ELECTROMECHANICAL GEAR MOTOR IRREVERSIBLE 24V FOR CONDOMINIUM USES  The KUDU piston is composed of two die-cast aluminum bodies, powder-coated, containing the electric motor, the first worm gear reduction, the release system, and the bevel gear drive made of sintered steel. On top of the motor is a cover with an easily operable lock to access the motor release knob. The front cover houses the capacitor and the electrical connections for the motor and the micro-switches in case the motor is equipped with limit switches. The piston has the same dimensions and mounting brackets as the PUMA-PUMA PLUS, allowing for easy and quick replacement, and is made in a single version without using right and left models.

KUDU-L 230V ELECTROMECHANICAL GEAR MOTOR IRREVERSIBLE 230V FOR RESIDENTIAL USES The KUDU piston is composed of two die-cast aluminum bodies, powder-coated, containing the electric motor, the first worm gear reduction, the release system, and the bevel gear drive made of sintered steel. On top of the motor is a cover with an easily operable lock to access the motor release knob. The front cover houses the capacitor and the electrical connections for the motor and the micro-switches in case the motor is equipped with limit switches. The piston has the same dimensions and mounting brackets as the PUMA-PUMA PLUS, allowing for easy and quick replacement, and is made in a single version without using right and left models.

KUDU-L 24V ELECTROMECHANICAL GEAR MOTOR IRREVERSIBLE 24V FOR CONDOMINIUM USES  The KUDU piston is composed of two die-cast aluminum bodies, powder-coated, containing the electric motor, the first worm gear reduction, the release system, and the bevel gear drive made of sintered steel. On top of the motor is a cover with an easily operable lock to access the motor release knob. The front cover houses the capacitor and the electrical connections for the motor and the micro-switches in case the motor is equipped with limit switches. The piston has the same dimensions and mounting brackets as the PUMA-PUMA PLUS, allowing for easy and quick replacement, and is made in a single version without using right and left models.

KUDU-SL 230V ELECTROMECHANICAL GEAR MOTOR IRREVERSIBLE 230V FOR RESIDENTIAL USES The KUDU piston is composed of two die-cast aluminum bodies, powder-coated, containing the electric motor, the first worm gear reduction, the release system, and the bevel gear drive made of sintered steel. On top of the motor is a cover with an easily operable lock to access the motor release knob. The front cover houses the capacitor and the electrical connections for the motor and the micro-switches in case the motor is equipped with limit switches. The piston has the same dimensions and mounting brackets as the PUMA-PUMA PLUS, allowing for easy and quick replacement, and is made in a single version without using right and left models.

KUDU-SL 24V MOTORÉDUCTEUR ÉLECTROMÉCANIQUE IRRÉVERSIBLE 24V POUR UTILISATIONS EN COPROPRIÉTÉ  Le piston KUDU est composé de deux corps en aluminium moulés et peints par poudrage contenant le moteur électrique, la première réduction à vis sans fin, le système de déverrouillage et la transmission par engrenages coniques en acier fritté. Sur la partie supérieure du moteur se trouve le couvercle avec une serrure facilement actionnable pour accéder au bouton de déverrouillage du moteur. Le couvercle avant abrite le condensateur et les connexions électriques du moteur et des micro-interrupteurs dans le cas où le moteur est équipé de fins de course électriques. Le piston a les mêmes dimensions et les mêmes supports de fixation que les PUMA-PUMA PLUS, ce qui permet un remplacement facile et rapide, et est réalisé en une seule version sans utiliser de modèles droit et gauche.

KUDU-SL 24V ELECTROMECHANICAL GEAR MOTOR IRREVERSIBLE 24V FOR CONDOMINIUM USES The KUDU piston is composed of two die-cast aluminum bodies, powder-coated, containing the electric motor, the first worm gear reduction, the release system, and the bevel gear drive made of sintered steel. On top of the motor is a cover with an easily operable lock to access the motor release knob. The front cover houses the capacitor and the electrical connections for the motor and the micro-switches in case the motor is equipped with limit switches. The piston has the same dimensions and mounting brackets as the PUMA-PUMA PLUS, allowing for easy and quick replacement, and is made in a single version without using right and left models.

KUDU 24V IRREVERSIBLE ELECTROMECHANICAL GEAR MOTOR 24V FOR CONDOMINIUM USE The KUDU piston is composed of two die-cast aluminum bodies, powder-coated, containing the electric motor, the first worm gear reduction, the release system, and the bevel gear drive made of sintered steel. On top of the motor is a cover with an easily operable lock to access the motor release knob. The front cover houses the capacitor and the electrical connections for the motor and the micro-switches in case the motor is equipped with limit switches. The piston has the same dimensions and mounting brackets as the PUMA-PUMA PLUS, allowing for easy and quick replacement, and is made in a single version without using right and left models.